Product name: Intelligent multifunctional assembly line
Specification and model: L21000 * W740 * H750MM
Unit: piece
Remarks:
1. Specification: L21000 * W700 * H740MM
2. Motor: Direct drive motor (dual motor)
3. Drive method: dual motor direct drive
4. Voltage: 380V
5. Power: ≥ 0.75KW+0.55KW
6. Linear speed: 0.15M/s
7. Function: Intelligent switching between single and double lines, capable of one-way operation, two-way operation, forward and backward operation
8. Aluminum alloy frame structure, with advanced aluminum oxide main material surface sandblasted and oxidized treatment. The upper side plate is an integral circular arc upper side plate. The specifications of aluminum alloy profiles formed in one go: 180mm * 30mm * 2mm, support profiles: 60 * 30mm, 30 * 30mm; The top aluminum profile of the semi-circular structure side panel is smooth and does not damage clothing.

9. Side sealing plate: Made of cold-rolled sheet with a thickness of no less than 1.0mm, with a white color, and processed by acid pickling, phosphating, and spray molding. The inner side of the assembly line is equipped with a 45 ° angle wool strip to prevent the cutting pieces from getting entangled in the assembly line and the entry of fine dust and dust into the interior of the assembly line. 10. The middle of the assembly line adopts an aluminum alloy lifting partition, with a thickness of 10mm * a height of 100mm; Overall molding, capable of using both electric and manual elevators to lift and lower the partition board,
11. Chute: The design of the chute should consider the convenience of cleaning garbage on the conveyor belt to prevent garbage from accumulating in the flow equipment.
12. Electric control system: 1 industrial control computer is used, and production data management software is installed to generate production data reports; Reserved data transmission interface, control system, with one button power off function, dual control motors, and the ability to modify Kanban data without affecting the normal operation of the assembly line. Equipped with precise limit control of inching switches. 13 main machines are equipped with 1 set of 750W and 1 set of 550W, with a speed ratio of 1:120 to operate a reduction motor. The control buttons are concentrated at the machine head position for operation, using RSS electronic soft start control, which runs smoothly and has strong safety. The position control adopts photoelectric switches, with high accuracy of position detection and long operating life; Adopting 24V dual electromagnetic clutch to control the mechanical spindle, dual line/single line separation conversion, ensuring reliable separation of dual lines and complete synchronization of single lines;

14. The brand new OPB material track is an overall flat shape with hidden hinges, each segment is 50mm, and is connected by threading rods at the bottom; The surface is flat and smooth, with small connection gaps; Galvanized square tube brackets are used on both sides of the lower support.

15. The assembly line has an independent control system, with independent control and interconnection ports for signage and device data. The assembly line is equipped with at least 2 sets of emergency stop devices.
16. The display screen adopts a 55 inch LCD display screen (double-sided display), which should include: model number, target production quantity, beat time (adjustable time is 0-999 seconds), beat production quantity, actual production quantity, repair rate, repair quantity, abnormal workstation quality, responsible person information input, etc. After connecting to the network, relevant information can be modified on the backend computer. Can preset data transmission interface, connect to computer communication, automatically collect and transmit data, and achieve clothing processing management

Consultation